|
|
|
TURBO-GX7 |
 |
|
|
Turboflame Original GX7: Powerful 1300c laser jet flame. Lock feature for temporary continuous burning. Safety cap. Ideal as a mini blow torch.
The GX7 burns at any angle - even upside down - and keeps going no matter what the weather is doing. Unique, lock-on safety cap for secure storage and travel.
PLEASE NOTE - For best performance and longevity of your lighter, only use gas marked 'Triple/Double Refined' or 'Near Zero Impurities'. Impurities in gas may cause carbon build-up and clog the burner which is not covered under warranty. Therefore please consider purchasing additional gas when buying your lighter. Our gas is high quality premium rate with near zero impurities and is recommended for use with all Turboflame products. |
| Specification |
| Refillable using lighter gas.
Power laser-jet flame – ideal for hard to reach places.
Multi-angle flame lights upside downward horizontally. Great for stoves, BBQ's and candles.
1300ºC flame cuts through nylon rope, seat cord, spot heats plastic/rubber and solders/quenches metal.
Wax skis, seal micro-cracks, thaw frozen locks, fuse wires, and other outdoor uses.
Warning
Keep away from children.
Ignite lighter away from self, others and flammables.
Beware of flame which my be invisible in bright light. Actual heat length is longer than visible flame.
Be sure flame is fully extinguished after use.
Turboflame is ideal for ignition and short-duration high intensity heat (1300ºC). If used longer than 15 seconds continuously the tip may become hot and due care should be taken before storage.
Never expose to heat above 50ºC (120ºF) or to prolonged sunlight (eg. car dashboard).
Contains flammable gas under pressure. Never puncture or put in fire.
Care and Maintenance
For long term reliability of Turboflame it is essential the burner hole – where flame comes out – be kept clean.
Objects should be lit at least 1 inch away from burner hole – i.e. In heat of flame and not flame itself.
Do not touch burner hole with the tip of a cigarette or other object. This will cause ash/debris to fall in the lighter and clog it up.
Keep lighter clean from dust and dirt in pockets.
Periodically, blow dust and carbon build up from burner hole using compressed air as follows (compressed air can be purchased from office supply or computer/hardware stores):
Place compressed air canister at least 1 inch away from burner hole or damage may occur.
Proceed with 3 short bursts of air. Allow lighter to reach room temperature before igniting.
When flame gets weak and low it usually indicates gas tanks is empty. At this point bleed and refill lighter (see accompanying instructions for refilling information). Constant adjustment of flame height will cause damage to lighter.
If gas tank is still full and flame is still weak or low, turn up flame height adjuster at base of lighter to achieve desired flame height. Never adjust height while flame is on. Do not force adjustment valve, beyond pre-set maximum and minimum levels.
Do not set the flame too high. Apart from being dangerous to the user, a very high flame may cause the lighter to malfunction. Lighter will not ignite and a hissing sound will be heard. Lower flame immediately.
If flame jumps it usually indicates trapped air in the gas tank. Bleed air and refill lighter.
Operate ignition switch slowly with and care. Misfiring usually occurs with fast ignition or flicking lighter on and off.
For best performance and longevity of your lighter, only use gas marked 'Triple/Double Refined' or 'Near Zero Impurities'. Impurities in gas may cause carbon build-up and clog the burner. |
|
Dialog.confirm($('form').innerHTML, {className:"alphacube", width:600,
okLabel: "Send", cancelLabel: "Cancel",
onOk:function(win){
new Ajax.Request('ajax_ask_a_question.php', {
method: 'get',
parameters: {pID: '4023',
name: $('form_name').value,
mail: $('form_email').value,
question: $('form_question').value}});
return true;
}});
|
|
